top of page
Room Controller

Fancoil thermostat in high-quality design for individual single-room temperature- and fan control. A glass surface with intuitive touch control buttons and display combine design, feel and functionality in an outstanding way. The internal controller of the JOY calculates control values for fans and heating/cooling applications, which are provided via analog or digital outputs (depending on type). The possible integration of various external sensors (e.g. window contacts, change-over, condensation sensors, etc.) allows temperature and fan control tailored to the application. The device can be mounted in a standard flush-mounted box.

Technical Data

Application/type
Fan coil thermostat, Room thermostat
Purpose
Room Climate Control, Measure values
Measured values
temperature, relative humidity
Interface
EnOcean (868 MHz), RS485 Modbus, RS485 BACnet, Active, 0..10 V, Switch contact
Functions
hardware outputs, fan control relay, fan control 0..10 V, heating + cooling relay, heating + cooling 0..10 V, to control 6-way control valve, to control valve actuators SAB, Fan coil thermostat, change-over, integrated PI controller, integrated PI and two-position controller, integrated PI and two-/three-position controller, frost protection, window/door monitoring, presence, MSG-server for 2nd zone
Operating functions
setpoint adjustment temperature, fan stage adjustment, standby/presence detection
Operating elements
5 touch buttons
Configuration
uConfig, BUS
Output voltage
0..10 V, 3x 0..10 V, max. load 5 mA, to control EC fan, heating + cooling, heating + cooling or to control 6-way control valve
Output switch contact
2x contact NO, 1x heating, 1x cooling, load max. 500 mA (240 V, Triac), 3x contact NO, fan stages, load max. 3 A
Input
1x input for NTC10k or floating contact, 1x input for potential contact (230 V ~), 1x input for floating contact, 2x input for floating contact
Network technology
RS485 Modbus, RS485 BACnet (MS/TP)
Radio technology
EnOcean (IEC 14543-3-10) 868 MHz, transmission power <10 mW
Data transmission
20 channels for sender, receiver or message-server, RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C)
0..+50
Output signal temperature
scaling according EEP, 0..+40 °C, 0..+50 °C
Operating range humidity
max. 85% rH non-condensing
Accuracy temperature
±1 K (typ. at 21 °C), within default measuring range
Measuring range humidity
0..100% rH non-condensing
Accuracy humidity
±2% between 10..90% rH (typ. at 21 °C)
Power supply
24 V = (±10%) SELV, 24 V ~ (±10%) SELV, 85..260 V ~
Power consumption
typ. 2,5 W (24 V =), max. 2,5 VA (260 V ~), max. 3 VA (260 V ~)
Display
LCD 60x44 mm, 240x160 px, backlight cold white
Enclosure
PC, cover glass
Colour
pure white, black
Protection (IP)
IP30, according to EN 60529
Connection
terminal block, max. 1,5 mm², inputs max. 1,0 mm²
Mounting
in standard EU box (Ø=60 mm, depth min. 45 mm)
Packaging length (mm)
196
Packaging width (mm)
162
Packaging height (mm)
37
Device length (mm)
140
Device width (mm)
78
Device height (mm)
35
Weight (g)
195
bottom of page